전자부품 데이터시트 검색엔진 |
|
9-1437287-8 데이터시트(PDF) 10 Page - Tyco Electronics |
|
9-1437287-8 데이터시트(HTML) 10 Page - Tyco Electronics |
10 / 41 page Product Specification 108-78140 Rev. A8 10 of 41 No. ITEM MEASUREMENT METHOD PERFORMANCE 7.15 Seal Ability Seal Ability is measured with compressed air fed into the water-proof section of the connector. Before runnig the test, the tip of the wire is soldered and then sealed with adhesives. (Fig.4) Measurement is taken with 9800Pa(gage)(0.1kg/c㎡)compressed air fed into the connector submerged for duration of 30 seconds. If the air does not leak for 30 seconds, the pressure is raised each tine by an increment of 9800Pa(gage)(0.1kg/c㎡). Adhesive Soldering Lead Fig.4 Fig.4 Fig.4 Fig.4 Initial: 98kPa(gage) (1kg/cm 2 )or more After Durability Test: 48kPa(gage) (0.5kg/cm 2 )or more |
유사한 부품 번호 - 9-1437287-8 |
|
유사한 설명 - 9-1437287-8 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |