전자부품 데이터시트 검색엔진 |
|
ADMP504ACEZ-RL 데이터시트(PDF) 9 Page - Analog Devices |
|
ADMP504ACEZ-RL 데이터시트(HTML) 9 Page - Analog Devices |
9 / 12 page Data Sheet ADMP504 Rev. 0 | Page 9 of 12 PCB LAND PATTERN LAYOUT The recommended PCB land pattern for the ADMP504 should be laid out to a 1:1 ratio to the solder pads on the microphone package, as shown in Figure 10. Take care to avoid applying solder paste to the sound hole in the PCB. A suggested solder paste stencil pattern layout is shown in Figure 11. The diameter of the sound hole in the PCB should be larger than the diameter of the sound port of the microphone. A minimum diameter of 0.5 mm is recommended. Ø1.55 Ø0.95 1.52 0.90 1.90 1.22 0.68 0.61 0.61 Figure 10. PCB Land Pattern Layout 1.22 2× 0.8 × 0.6 0.2 × 45° TYP 1.52mm 1.55/1.05 DIA. 0.225 CUT WIDTH (2×) Figure 11. Suggested Solder Paste Stencil Pattern Layout |
유사한 부품 번호 - ADMP504ACEZ-RL |
|
유사한 설명 - ADMP504ACEZ-RL |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |