전자부품 데이터시트 검색엔진 |
|
74AVC16827DGGRE4 데이터시트(PDF) 4 Page - Texas Instruments |
|
74AVC16827DGGRE4 데이터시트(HTML) 4 Page - Texas Instruments |
4 / 15 page www.ti.com Absolute Maximum Ratings (1) Recommended Operating Conditions SN74AVC16827 20-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS SCES176I – DECEMBER 1998 – REVISED JUNE 2005 over operating free-air temperature range (unless otherwise noted) MIN MAX UNIT VCC Supply voltage range –0.5 4.6 V VI Input voltage range(2) –0.5 4.6 V VO Voltage range applied to any output in the high-impedance or power-off state(2) –0.5 4.6 V VO Voltage range applied to any output in the high or low state(2)(3) –0.5 VCC + 0.5 V IIK Input clamp current VI < 0 –50 mA IOK Output clamp current VO < 0 –50 mA IO Continuous output current ±50 mA Continuous current through each VCC or GND ±100 mA DGG package 64 θ JA Package thermal impedance(4) °C/W DGV package 48 Tstg Storage temperature range –65 150 °C (1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) The input negative-voltage and output ratings may be exceeded if the input and output current ratings are observed. (3) This value is limited to 4.6 V maximum. (4) The package thermal impedance is calculated in accordance with JESD 51. MIN MAX UNIT VCC Supply voltage 1.2 3.6 V VCC = 1.2 V VCC VCC = 1.4 V to 1.6 V 0.65 × VCC VIH High-level input voltage VCC = 1.65 V to 1.95 V 0.65 × VCC V VCC = 2.3 V to 2.7 V 1.7 VCC = 3 V to 3.6 V 2 VCC = 1.2 V GND VCC = 1.4 V to 1.6 V 0.35 × VCC VIL Low-level input voltage VCC = 1.65 V to 1.95 V 0.35 × VCC V VCC = 2.3 V to 2.7 V 0.7 VCC = 3 V to 3.6 V 0.8 VI Input voltage 0 3.6 V Active state 0 VCC VO Output voltage V 3-state 0 3.6 VCC = 1.4 V to 1.6 V –2 VCC = 1.65 V to 1.95 V –4 IOHS Static high-level output current(1) mA VCC = 2.3 V to 2.7 V –8 VCC = 3 V to 3.6 V –12 VCC = 1.4 V to 1.6 V 2 VCC = 1.65 V to 1.95 V 4 IOLS Static low-level output current(1) mA VCC = 2.3 V to 2.7 V 8 VCC = 3 V to 3.6 V 12 ∆t/∆v Input transition rise or fall rate VCC = 1.4 V to 3.6 V 5 ns/V TA Operating free-air temperature –40 85 °C (1) Dynamic drive capability is equivalent to standard outputs with IOH and IOL of ±24 mA at 3.3-V VCC. See Figure 1 for VOL vs IOL and VOH vs IOH characteristics. Refer to the TI application reports, AVC Logic Family Technology and Applications, literature number SCEA006, and Dynamic Output Control (DOC™) Circuitry Technology and Applications, literature number SCEA009. 4 |
유사한 부품 번호 - 74AVC16827DGGRE4 |
|
유사한 설명 - 74AVC16827DGGRE4 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |