 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
OP145B 데이터시트(PDF) 3 Page - OPTEK Technologies |
|
||||||||||||||||||||||||||||||
OP145B 데이터시트(HTML) 3 Page - OPTEK Technologies |
|
|
3 / 5 page  OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 04/2012 Page 3 of 5 Plastic Infrared Emitting Diode OP140, OP145 Series Absolute Maximum Ratings (TA=25°C unless otherwise noted) Storage and Operating Temperature Range -40o C to +100o C Reverse Voltage 2.0 V Continuous Forward Current 50 mA Peak Forward Current 3.0 A Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron](1) 260° C Power Dissipation(2) 100 mW Notes: 1. RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. A maximum of 20 grams force may be applied to the leads when soldering. 2. Derate linearly 1.33 mW/° C above 25° C. 3. EE(APT) is a measurement of the average apertured radiant energy incident upon a sensing area 0.180” (4.57 mm) in diameter perpendicular to and centered on the mechanical axis of the lens and 0.653” (6.60 mm) from the lens tip. EE(APT) is not necessarily uniform within the measured area. Electrical Characteristics (TA = 25°C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode EE (APT) Apertured Radiant Incidence OP140A, OP145A OP140B, OP145B OP140C, OP145C OP140D, OP145D 0.40 0.30 0.20 0.10 - - - - - 0.55 0.40 - mW/cm2 IF = 20 mA (3) VF Forward Voltage - - 1.60 V IF = 20 mA IR Reverse Current - - 100 µA VR= 2.0 V λP Wavelength at Peak Emission - 935 - nm IF = 10 mA B Spectral Bandwidth between Half Power Points - 50 - nm IF = 10 mA ∆λP /∆T Spectral Shift with Temperature - ±0.30 - nm/°C IF = Constant θHP Emission Angle at Half Power Points - 40 - Degree IF = 20 mA tr Output Rise Time - 1000 - ns tf Output Fall Time - 500 - ns IF(PK)=100 mA, PW=10 µs, and D.C.=10.0% |
유사한 부품 번호 - OP145B |
|
유사한 설명 - OP145B |
|
|
|
링크 URL |
| 개인정보취급방침 |
| ALLDATASHEET.CO.KR |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
