전자부품 데이터시트 검색엔진 |
|
MC-4516DA726EFC-A10 데이터시트(PDF) 6 Page - NEC |
|
MC-4516DA726EFC-A10 데이터시트(HTML) 6 Page - NEC |
6 / 6 page Data Sheet M13203EJ7V0DS00 6 MC-4516DA726 DC Characteristics (Recommended Operating Conditions unless otherwise noted) Parameter Symbol Test condition Grade MIN. MAX. Unit Notes Operating current ICC1 Burst length = 1 /CAS latency = 2 -A80 1,200 mA 1 tRC ≥ tRC (MIN.), IO = 0 mA -A10 1,200 /CAS latency = 3 -A80 1,200 -A10 1,200 Precharge standby current in ICC2P CKE ≤ VIL (MAX.), tCK = 15 ns 259 mA power down mode ICC2PS CKE ≤ VIL (MAX.), tCK = ∞ 89 Precharge standby current in ICC2N CKE ≥ VIH (MIN.), tCK = 15 ns, /CS ≥ VIH (MIN.), 430 mA non power down mode Input signals are changed one time during 30 ns. ICC2NS CKE ≥ VIH (MIN.), tCK = ∞ , 152 Input signals are stable. Active standby current in ICC3P CKE ≤ VIL (MAX.), tCK = 15 ns 295 mA power down mode ICC3PS CKE ≤ VIL (MAX.), tCK = ∞ 116 Active standby current in ICC3N CKE ≥ VIH (MIN.), tCK = 15 ns, /CS ≥ VIH (MIN.), 520 mA non power down mode Input signals are changed one time during 30 ns. ICC3NS CKE ≥ VIH (MIN.), tCK = ∞ , 260 Input signals are stable. Operating current ICC4 tCK ≥ tCK (MIN.), IO = 0 mA /CAS latency = 2 -A80 1,380 mA 2 (Burst mode) -A10 1,155 /CAS latency = 3 -A80 1,605 -A10 1,425 CBR (Auto) Refresh current ICC5 tRC ≥ tRC (MIN.) /CAS latency = 2 -A80 2,370 mA 3 -A10 2,370 /CAS latency = 3 -A80 2,370 -A10 2,370 Self refresh current ICC6 CKE ≤ 0.2 V 268 mA Input leakage current II (L) VI = 0 to 3.6 V, All other pins not under test = 0 V –10 +10 µA Output leakage current IO (L) DOUT is disabled, VO = 0 to 3.6 V –1.5 +1.5 µA High level output voltage VOH IO = –4.0 mA 2.4 V Low level output voltage VOL IO = +4.0 mA 0.4 V Notes 1. ICC1 depends on output loading and cycle rates. Specified values are obtained with the output open. In addition to this, ICC1 is measured on condition that addresses are changed only one time during tCK (MIN.). 2.ICC4 depends on output loading and cycle rates. Specified values are obtained with the output open. In addition to this, ICC4 is measured on condition that addresses are changed only one time during tCK (MIN.). 3. ICC5 is measured on condition that addresses are changed only one time during tCK (MIN.). 5 5 5 5 5 5 5 5 5 |
유사한 부품 번호 - MC-4516DA726EFC-A10 |
|
유사한 설명 - MC-4516DA726EFC-A10 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |