1-158

Notes:

1. See Figure 5 to establish pulsed operating conditions.

2. The combined simultaneous current must not exceed the maximum.

3. The combined simultaneous power must not exceed the maximum.

4. For HER and Green derate linearly from 50

°C at 0.5 mA/°C.

5. For HER and Green derate linearly from 25

°C at 1.8 mW/°C.

6. The transient peak current is the maximum non-recurring current that can be applied

to the device without damaging the LED die and wirebond. It is not recommended that

the device be operated at peak currents beyond the peak forward current listed in the

Absolute Maximum Ratings.

High Efficiency

Parameter

Red/Green

Units

Peak Forward Current

90

mA

25

mA

30

mA

135

mW

Operating Temperature Range

-20 to +85

°C

Storage Temperature Range

-55 to +100

Reverse Voltage (I

5

V

500

mA

(10

µsec Pulse)

Lead Soldering Temperature

[1.6 mm (0.063 in.) below

260

°C for 5 seconds

seating plane]

Package Dimensions, continued

0.89 (0.035)

0.64 (0.025)

6.10 (0.240)

5.59 (0.220)

5.08 (0.200)

4.57 (0.180)

20.32

(0.800)

MIN.

0.508

(0.020)

9.19 (0.362)

8.43 (0.332)

2.54 ± 0.25

(0.100 ± 0.010)

SQUARE

NOMINAL

GREEN

ANODE

2.54 ± 0.25

(0.100 ± 0.010)

COMMON

CATHODE

FLAT INDICATES

RED ANODE

RED ANODE

(SHORT LEAD)

COMMON CATHODE

5.46 (0.215)

4.98 (0.196)

5.18 (0.204)

4.93 (0.194)

20.32

(0.800)

MIN.

0.508

(0.020)

8.00 (0.315)

7.37 (0.290)

2.54 ± 0.25

(0.100 ± 0.010)

SQUARE

NOMINAL

GREEN

ANODE

2.54 ± 0.25

(0.100 ± 0.010)

COMMON

CATHODE

RED ANODE

(SHORT LEAD)

COMMON CATHODE

2.54 ± 0.25

(0.100 ± 0.010)

2.41 (0.095)

2.03 (0.085)

2.23 (0.088)

1.98 (0.078)

NOTES:

1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).

2. AN EPOXY MENISCUS MAY EXTEND ABOUT

1 MM (0.040") DOWN THE LEADS.

SIDE VIEW

2.54 ± 0.25

(0.100 ± 0.010)