전자부품 데이터시트 검색엔진 |
|
SN74LV4051APW 데이터시트(PDF) 4 Page - Texas Instruments |
|
|
SN74LV4051APW 데이터시트(HTML) 4 Page - Texas Instruments |
4 / 33 page SN74LV4051A SCLS428I – MAY 1999 – REVISED SEPTEMBER 2015 www.ti.com 6 Specifications 6.1 Absolute Maximum Ratings over operating free-air temperature range (unless otherwise noted) (1) MIN MAX UNIT VCC Supply voltage range –0.5 7.0 V VI Input voltage range(2) –0.5 7.0 V VIO Switch I/O voltage range(2)(3) –0.5 VCC + 0.5 V IIK Input clamp current VI < 0 −20 mA IIOK I/O diode current VIO < 0 −50 mA IT Switch through current VIO = 0 to VCC ±25 mA Continuous current through VCC or GND ±50 mA TJ Max Junction temperature 150 °C Tstg Storage temperature –65 150 °C (1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed. (3) This value is limited to 5.5-V maximum. 6.2 ESD Ratings VALUE UNIT Human body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) ±2000 V(ESD) Electrostatic discharge V Charged-device model (CDM), per JEDEC specification JESD22- ±1000 C101(2) (1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. (2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. 6.3 Recommended Operating Conditions over operating free-air temperature range (unless otherwise noted) (1) MIN NOM MAX UNIT VCC Supply voltage 2(2) 5.5 V VCC = 2 V 1.5 VCC = 2.3 V to 2.7 V VCC × 0.7 High-level input voltage, VIH V control inputs VCC = 3 V to 3.6 V VCC × 0.7 VCC = 4.5 V to 5.5 V VCC × 0.7 VCC = 2 V 0.5 VCC = 2.3 V to 2.7 V VCC × 0.3 Low-level input voltage, VIL V control inputs VCC = 3 V to 3.6 V VCC × 0.3 VCC = 4.5 V to 5.5 V VCC × 0.3 VI Control input voltage 0 5.5 V VIO Input or output voltage 0 VCC V VCC = 2.3 V to 2.7 V 200 Δt/Δv Input transition rise or fall rate VCC = 3 V to 3.6 V 100 ns/V VCC = 4.5 V to 5.5 V 20 TA Operating free-air temperature –40 85 °C (1) All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to TI application report Implications of Slow or Floating CMOS Inputs, SCBA004. (2) With supply voltages at or near 2 V, the analog switch ON-state resistance becomes very nonlinear. It is recommended that only digital signals be transmitted at these low supply voltages. 4 Submit Documentation Feedback Copyright © 1999–2015, Texas Instruments Incorporated Product Folder Links: SN74LV4051A |
유사한 부품 번호 - SN74LV4051APW |
|
유사한 설명 - SN74LV4051APW |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |