ADC108S102

www.ti.com

SNAS336B – SEPTEMBER 2005 – REVISED MARCH 2013

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

Absolute Maximum Ratings

(1) (2)

−0.3V to 6.5V

Voltage on Any Pin to GND

±10 mA

±20 mA

Human Body Model

2500V

Machine Model

250V

For soldering specifications, see product folder at http://www.ti.com/lit/SNOA549

Junction Temperature

+150°C

Storage Temperature

−65°C to +150°C

(1)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for

which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the

Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may

degrade when the device is not operated under the listed test conditions.

(2)

If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and

specifications.

(3)

limited to 10 mA. The 20 mA maximum package input current rating limits the number of pins that can safely exceed the power supplies

with an input current of 10 mA to two.

(4)

operating ambient temperature of 105°C. Note that the power consumption of this device under normal operation is a maximum of 12

mW. The values for maximum power dissipation listed above will be reached only when the ADC108S102 is operated in a severe fault

condition (e.g. when input or output pins are driven beyond the power supply voltages, or the power supply polarity is reversed).

Obviously, such conditions should always be avoided.

(5)

Human body model is 100 pF capacitor discharged through a 1.5 k

Ω resistor. Machine model is 220 pF discharged through ZERO ohms

Operating Ratings

(1) (2)

Operating Temperature

+2.7V to +5.25V

Digital Input Voltage

Analog Input Voltage

Clock Frequency

8 MHz to 16 MHz

(1)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for

which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the

Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may

degrade when the device is not operated under the listed test conditions.

(2)

All voltages are measured with respect to GND = 0V, unless otherwise specified.

Package Thermal Resistance

Package

16-lead TSSOP on 4-layer, 2 oz. PCB

96°C / W

Copyright © 2005–2013, Texas Instruments Incorporated

Submit Documentation Feedback

3

Product Folder Links: ADC108S102