전자부품 데이터시트 검색엔진 |
|
AM26C31-EP 데이터시트(PDF) 4 Page - Texas Instruments |
|
AM26C31-EP 데이터시트(HTML) 4 Page - Texas Instruments |
4 / 12 page www.ti.com ELECTRICAL CHARACTERISTICS SWITCHING CHARACTERISTICS AM26C31-EP QUADRUPLE DIFFERENTIAL LINE DRIVER SLLS871 – NOVEMBER 2007 over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP(1) MAX UNIT VOH High-level output voltage IO = –20 mA 2.2 3.4 V VOL Low-level output voltage IO = 20 mA 0.2 0.4 V |VOD| Differential output voltage magnitude RL = 100 Ω, See Figure 1 2 3.1 V Δ|VOD| Change in magnitude of differential output voltage (2) RL = 100 Ω, See Figure 1 ±0.4 V VOC Common-mode output voltage RL = 100 Ω, See Figure 1 3 V Change in magnitude of common-mode output Δ|VOC| RL = 100 Ω, See Figure 1 ±0.4 V voltage(2) II Input current VI = VCC or GND ±1 µA VO = 6 V 100 IO(off) Driver output current with power off VCC = 0 µA VO = –0.25 V –100 IOS Driver output short-circuit current VO = 0 –170 mA VO = 2.5 V 20 IOZ High-impedance off-state output current µA VO = 0.5 V –20 IO = 0 VI = 0 V or 5 V 100 µA ICC Quiescent supply current IO = 0 VI = 2.4 V or 0.5 V (3) 3.2 mA CI Input capacitance 6 pF (1) All typical values are at VCC = 5 V and TA = 25°C. (2) Δ|VOD| and Δ|VOC| are the changes in magnitude of VOD and VOC, respectively, that occur when the input is changed from a high level to a low level. (3) This parameter is measured per input. All other inputs are at 0 V or 5 V. over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP(1) MAX UNIT Propagation delay time, low- to high-level tPLH S1 is open, See Figure 2 7 12 ns output Propagation delay time, high- to low-level tPHL S1 is open, See Figure 2 6.5 12 ns output tsk(p) Pulse skew time (|tPLH – tPHL|) S1 is open, See Figure 2 0.5 4 ns tr(OD), tf(OD) Differential output rise and fall times S1 is open, See Figure 3 5 12 ns tPZH Output enable time to high level S1 is closed, See Figure 4 10 19 ns tPZL Output enable time to low level S1 is closed, See Figure 4 10 19 ns tPHZ Output disable time from high level S1 is closed, See Figure 4 7 16 ns tPLZ Output disable time from low level S1 is closed, See Figure 4 7 16 ns Cpd Power dissipation capacitance (each driver)(2) S1 is open, See Figure 2 100 pF (1) All typical values are at VCC = 5 V, TA = 25°C. (2) Cpd is used to estimate the switching losses according to PD = Cpd × VCC 2 × f, where f is the switching frequency. 4 Submit Documentation Feedback Copyright © 2007, Texas Instruments Incorporated |
유사한 부품 번호 - AM26C31-EP_16 |
|
유사한 설명 - AM26C31-EP_16 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |