전자부품 데이터시트 검색엔진 |
|
LF411CN 데이터시트(PDF) 4 Page - National Semiconductor (TI) |
|
|
LF411CN 데이터시트(HTML) 4 Page - National Semiconductor (TI) |
4 / 12 page AC Electrical Characteristic (Note 6) (Continued) Note 4: For operating at elevated temperature, these devices must be derated based on a thermal resistance of θjA. Note 5: These devices are available in both the commercial temperature range 0˚C ≤TA≤70˚C and the military temperature range −55˚C≤TA≤125˚C. The temperature range is designated by the position just before the package type in the device number. A “C” indicates the commercial temperature range and an “M” indicates the military temperature range. The military temperature range is available in “H” package only. Note 6: Unless otherwise specified, the specifications apply over the full temperature range and for VS=±20V for the LF411A and for VS=±15V for the LF411. VOS, IB, and IOS are measured at VCM=0. Note 7: The LF411A is 100% tested to this specification. The LF411 is sample tested to insure at least 90% of the units meet this specification. Note 8: The input bias currents are junction leakage currents which approximately double for every 10˚C increase in the junction temperature, Tj. Due to limited pro- duction test time, the input bias currents measured are correlated to junction temperature. In normal operation the junction temperature rises above the ambient tem- perature as a result of internal power dissipation, PD.Tj=TA+θjA PD where θjA is the thermal resistance from junction to ambient. Use of a heat sink is recommended if input bias current is to be kept to a minimum. Note 9: Supply voltage rejection ratio is measured for both supply magnitudes increasing or decreasing simultaneously in accordance with common practice, from ±15V to ±5V for the LF411 and from ±20V to ±5V for the LF411A. Note 10: RETS 411X for LF411MH and LF411MJ military specifications. Note 11: Max. Power Dissipation is defined by the package characteristics. Operating the part near the Max. Power Dissipation may cause the part to operate out- side guaranteed limits. Typical Performance Characteristics Input Bias Current DS005655-11 Input Bias Current DS005655-12 Supply Current DS005655-13 Positive Common-Mode Input Voltage Limit DS005655-14 Negative Common-Mode Input Voltage Limit DS005655-15 Positive Current Limit DS005655-16 www.national.com 4 |
유사한 부품 번호 - LF411CN |
|
유사한 설명 - LF411CN |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |