전자부품 데이터시트 검색엔진 |
|
FDW2520C 데이터시트(PDF) 1 Page - Analog Devices |
|
FDW2520C 데이터시트(HTML) 1 Page - Analog Devices |
1 / 24 page REV. C Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 www.analog.com Fax: 781/326-8703 © 2003 Analog Devices, Inc. All rights reserved. ADN8830 Thermoelectric Cooler Controller FEATURES High Efficiency Small Size: 5 mm 5 mm LFCSP Low Noise: <0.5% TEC Current Ripple Long-Term Temperature Stability: 0.01 C Temperature Lock Indication Temperature Monitoring Output Oscillator Synchronization with an External Signal Clock Phase Adjustment for Multiple Controllers Programmable Switching Frequency up to 1 MHz Thermistor Failure Alarm Maximum TEC Voltage Programmability APPLICATIONS Thermoelectric Cooler (TEC) Temperature Control Resistive Heating Element Control Temperature Stabilization Substrate (TSS) Control FUNCTIONAL BLOCK DIAGRAM PID COMPENSATION NETWORK TEMPERATURE MEASUREMENT AMPLIFIER PWM CONTROLLER FROM THERMISTOR TEMPERATURE SET INPUT VOLTAGE REFERENCE VREF OSCILLATOR FREQUENCY/PHASE CONTROL P-CHANNEL (UPPER MOSFET) N-CHANNEL MOSFET DRIVERS P-CHANNEL (LOWER MOSFET) N-CHANNEL GENERAL DESCRIPTION The ADN8830 is a monolithic controller that drives a thermo- electric cooler (TEC) to stabilize the temperature of a laser diode or a passive component used in telecommunications equipment. This device relies on a negative temperature coefficient (NTC) thermistor to sense the temperature of the object attached to the TEC. The target temperature is set with an analog input voltage either from a DAC or an external resistor divider. The loop is stabilized by a PID compensation amplifier with high stability and low noise. The compensation network can be adjusted by the user to optimize temperature settling time. The component values for this network can be calculated based on the thermal transfer function of the laser diode or obtained from the lookup table given in the Application Notes section. Voltage outputs are provided to monitor both the temperature of the object and the voltage across the TEC. A voltage reference of 2.5 V is also provided. |
유사한 부품 번호 - FDW2520C |
|
유사한 설명 - FDW2520C |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |