전자부품 데이터시트 검색엔진 |
|
74FST6800QG8 데이터시트(PDF) 3 Page - Integrated Device Technology |
|
74FST6800QG8 데이터시트(HTML) 3 Page - Integrated Device Technology |
3 / 5 page 3 INDUSTRIALTEMPERATURERANGE IDT74FST6800 10-BIT BUS SWITCH WITH PRECHARGED OUTPUTS Symbol Parameter Test Conditions(1) Min. Typ.(2) Max. Unit ΔICC Quiescent Power Supply Current VCC = Max. — 0.5 1.5 mA TTL Inputs HIGH VIN = 3.4V(3) ICCD Dynamic Power Supply VCC = Max., Outputs Open VIN = VCC —30 40 μA/ Current(4) Enable Pin Toggling VIN = GND MHz/ 50% Duty Cycle Enable IC Total Power Supply Current(6) VCC = Max., Outputs Open VIN = VCC —3 4 mA Enable Pin Toggling VIN = GND (Ten Switches Toggling) fi = 10MHz VIN = 3.4V — 3.3 4.8 50% Duty Cycle VIN = GND POWER SUPPLY CHARACTERISTICS NOTES: 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC = 5.0V, +25°C ambient. 3. Per TTL driven input (VIN = 3.4V). All other inputs at VCC or GND. 4. This parameter is not directly testable, but is derived for use in Total Power Supply Calculations. 5. Values for these conditions are examples of Icc formula. These limits are guaranteed but not tested. 6. IC = IQUIESCENT + IINPUTS + IDYNAMIC IC = ICC + ΔICC DHNT + ICCD (fiN) ICC = Quiescent Current ΔICC = Power Supply Current for a TTL High Input (VIN = 3.4V) DH = Duty Cycle for TTL Inputs High NT = Number of TTL Inputs at DH ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL) fCP = Clock Frequency for Register Devices (zero for non-register devices) fi = Input Frequency N = Number of SwitchesToggling at fi All currents are in milliamps and all frequencies are in megahertz SWITCHING CHARACTERISTICS OVER OPERATING RANGE FollowingConditionsApplyUnlessOtherwiseSpecified: Industrial: TA = -40°C to +85°C, VCC = 5.0V ± 5% Symbol Description Condition(1) Min.(2) Typ. Max. Unit tPLH DataPropagationDelay CL = 50pF — — 0.25 ns tPHL Ax, Bx to Bx, Ax(3,4) RL = 500 Ω tPZH Switch Turn On Delay 1.5 — 6.5 ns tPZL ON to Ax, Bx tPHZ Switch Turn Off Delay 1.5 — 5.5 ns tPLZ ON to Ax, Bx(3) NOTES: 1. See test circuit and waveforms. 2. Minimum limits guaranteed but not tested. 3. This parameter is guaranteed by design but not tested. 4. The bus switch contributes no propagation delay other than the RC delay of the on resistance of the switch and the load capacitance. The time constant for the switch alone is of the order of 0.25 ns for 50 pF load. Since this time is constant and much smaller than the rise/fall times of typical driving signals, it adds very little propagation delay to the system. Propagation delay of the bus switch when used in a system is determined by the driving circuit on the driving side of the switch and its interaction with the load on the driven side. |
유사한 부품 번호 - 74FST6800QG8 |
|
유사한 설명 - 74FST6800QG8 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |