전자부품 데이터시트 검색엔진 |
|
STP16DPP05MTR 데이터시트(PDF) 1 Page - STMicroelectronics |
|
STP16DPP05MTR 데이터시트(HTML) 1 Page - STMicroelectronics |
1 / 34 page April 2017 DocID16518 Rev 4 1/34 This is information on a product in full production. www.st.com STP16DPP05 Low voltage 16-bit constant current LED sink driver with output error detection Datasheet - production data Features Low voltage power supply down to 3 V 16 constant current output channels Adjustable output current through external resistor Short and open output error detection Serial data IN/parallel data OUT 3.3 V MCU-driving capability Output current: 3 to 40 mA 30 MHz clock frequency Available in high thermal efficiency TSSOP exposed pad ESD protection: 2 kV HBM, 200 V MM Description The STP16DPP05 is a monolithic, low voltage, low current power 16-bit shift register designed for LED panel displays. The device features a 16-bit serial-in, parallel-out shift register that feeds a 16- bit D-type storage register. In the output stage, sixteen regulated current sources are designed to provide 3 to 40 mA of constant current to drive the LEDs. The STP16DPP05 features open and short LED detection on the outputs. The detection circuit checks for 3 different conditions that can occur on the output line: short to GND, short to VO or open line. The data detection results are loaded in the shift registers and shifted out via the serial line output. The detection functionality is implemented without increasing the pin count, through a secondary function of the output enable and latch pin (DM1 and DM2 respectively). A dedicated logic sequence allows the device to enter or exit from detection mode. The STP16DPP05 output current can be adjusted through an external resistor to control the light intensity of the LEDs. LED brightness is adjustable from 0% to 100% via the OE/DM2 pin. The STP16DPP05 guarantees a 20 V output driving capability, allowing users to connect more LEDs in series. The high 30 MHz clock frequency makes the device suitable for high data rate transmission. The 3.3 V supply is well suited for applications which interface a 3.3 V MCU. Compared to a standard TSSOP package, the TSSOP with exposed pad increases heat dissipation capability by a factor of 2.5. Table 1: Device summary Order code Package Packing STP16DPP05MTR SO-24 (tape and reel) 1000 parts per reel STP16DPP05TTR TSSOP24 (tape and reel) 2500 parts per reel STP16DPP05XTTR TSSOP24 exposed pad (tape and reel) 2500 parts per reel STP16DPP05PTR QSOP-24 2500 parts per reel |
유사한 부품 번호 - STP16DPP05MTR |
|
유사한 설명 - STP16DPP05MTR |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |