전자부품 데이터시트 검색엔진 |
|
HCPL-5120 데이터시트(PDF) 6 Page - Broadcom Corporation. |
|
HCPL-5120 데이터시트(HTML) 6 Page - Broadcom Corporation. |
6 / 19 page Broadcom - 6 - HCPL-5120, HCPL-5121, and 5962-04204 Data Sheet Switching Specifications (AC) Switching Specifications (AC) Over recommended operating conditions (TA = –55°C to +125°C, IF(ON) = 10 mA to 18 mA, VF(OFF) = –3.0V to 0.8V, VCC = 15V to 30V, VEE = Ground), unless otherwise specified. Parameter Symbol Test Conditions Group A Subgroupsa a. Commercial parts receive 100% testing at 25°C (Subgroups 1 and 9). SMD and Class H parts receive 100% testing at 25°C, 125°C, and –55°C (Subgroups 1 and 9, 2 and 10, 3 and 11, respectively). Limits Unit Fig Notes Min Typb b. All typical values at TA = 25°C and VCC – VEE = 30V, unless otherwise noted. Max Propagation Delay Time to High Output Level tPLH Rg = 10Ω, Cg = 10 nF, f = 10 kHz, Duty Cycle = 50% 9, 10, 11 0.10 0.30 0.50 μs 10, 11, 12, 13, 14, 23 c c. This load condition approximates the gate load of a 1200V/75A IGBT. Propagation Delay Time to Low Output Level tPHL 9, 10, 11 0.10 0.30 0.50 μs Pulse Width Distortion PWD 9, 10, 11 — — 0.3 μs d d. Pulse Width Distortion (PWD) is defined as |tPHL – tPLH| for any given device. Propagation Delay Difference Between Any Two Parts PDD (tPHL – tPLH) 9, 10, 11 –0.35 — 0.35 μs 33, 34 e e. The difference between tPHL and tPLH between any two HCPL-512x parts under the same test condition. Rise Time tr —0.1 — μs 23 Fall Time tf —0.1 — μs UVLO Turn On Delay tUVLO ON VO > 5V, IF = 10 mA — 0.8 — μs 22 UVLO Turn Off Delay tUVLO OFF VO < 5V, IF = 10 mA — 0.6 — Output High Level Common-Mode Transient Immunity |CMH|IF = 10 mA, VCM = 1000V, VCC = 30V, TA = 25°C 910 — — kV/μs 24 f, g, h f. Pins 1 and 4 need to be connected to LED common. g. Common-mode transient immunity in the high state is the maximum tolerable dVCM/dt of the common-mode pulse, VCM, to assure that the output remains in the high state (i.e., VO > 15.0V). h. Parameters are tested as part of device initial characterization and after design and process changes. Parameters are guaranteed to limits specified for all lots not specifically tested. Output Low Level Common-Mode Transient Immunity |CML|VCM = 1000V, VF = 0V, VCC = 30V, TA = 25°C 910 — — kV/μs f, i, h i. Common-mode transient immunity in a low state is the maximum tolerable dVCM/dt of the common-mode pulse, VCM, to assure that the output remains in a low state (i.e., VO < 1.0V). |
유사한 부품 번호 - HCPL-5120 |
|
유사한 설명 - HCPL-5120 |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |