전자부품 데이터시트 검색엔진 |
|
SMF15VTF 데이터시트(PDF) 5 Page - Rohm |
|
SMF15VTF 데이터시트(HTML) 5 Page - Rohm |
5 / 10 page SMF10VTF Data sheet ●Appended figure Procedure to obtain ESD Clampimg Voltage IEC61000-4-2 Spec IEC61000-4-2 Waveform CS:150pF Rd:330Ω simplified diagram in ESD machine 1. Set up ESD Tester at IEC61000-4-2 condition. (IEC61000-4-2 :C=150pF, R=330Ω) 2. Mount a sample on the high frequency test board with the SMA connector. 3. Connect the SMA connector to the oscilloscope by 50Ωcable. Then, add the 10X-attenuator between test board and the cable to protect the oscilloscope. 4. Discharge ESD in contact discharge mode at any voltage. (normally 8kV Max.) www.rohm.com © 2017 ROHMCo., Ltd. All rights reserved. 5/6 2017/04/06_Rev.002 |
유사한 부품 번호 - SMF15VTF |
|
유사한 설명 - SMF15VTF |
|
|
링크 URL |
개인정보취급방침 |
ALLDATASHEET.CO.KR |
ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |